CABAC HNS710RT-KIT - Towel Rail Timer Kit 2 Wire 350W

Heated towel rails are a feature of many modern bathrooms. Usually, they rely on residents remembering to turn the rail on and off at the appropriate times to be effective. Our convenient Towel Rail Timer Kit is designed to provide warm towels without effort while also preventing the energy wastage that occurs when towel rail heaters are left on indefinitely.

The kit includes our innovative HNS710RT Routine Timer, which allows for automatic programming and manual on/off operation. Simple one-touch programming allows residents to specify exactly when they would like their towels to be ready with a single tap of a button. The timer is factory-set to run for one hour but can be set to run for up to six hours. Based on the program duration, the timer calculates when the towel rail needs to turn on and sets the routine accordingly. For user convenience, changing the timer duration at any point will not disrupt established routines-the timer recalculates the start time to fit the new program duration.

Our Heated Towel Rail Kit can support multiple programs to suit your lifestyle; set up to 8 pre-determined routines per day to ensure warm and dry towels for the whole family. Holiday Mode allows you to suspend these routines to conserve power while the home is unoccupied; a quick tap resumes Standby mode upon your return.

The HNS710RT-KIT is designed and engineered in Australia and certified to Australian and New Zealand standards.

Kit Contents
The S-Click Towel Rail Timer Kit includes:

• 1 x CABAC HNS710RT 2-Wire Routine Timer
• 1 x CABAC Wall Plate
• 1 x Cable Clamp
• 1 x Cabac/ HPM style push button
• 1 x Clipsal style push button
• 1 x Insulation Breakdown Sticker
• 1 x HNS710RT Instruction Sticker
• HNS710RT-Kit Towel Rail Timer Instruction Manual

Operating Conditions

• Operating Voltage: 230Va.c. 50Hz
• Operating Temperature: 0 to +50 degrees Celsius
• Certified Standard: CISPR15, AS/NZS 60669.2.1
• Maximum Load: 300W (do not use with inductive loads, i.e. fans, motors, pumps etc.)
• Minimum Load: 5W
• Maximum Current capacity: 1.3A
• Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS710RT-KIT Towel Rail Timer is installed as part of a fixed wire electrical installation. Such installations must be made by an electrical contractor or similarly qualified person by law. For installation instructions, operating instructions and important safety warnings, refer to the User Manual (see Additional Information).