DC 12V Motor Control Radio Remote Control DC Motor Remote Switch Controller Wireless Remote Switch for Motor Forward Stop Reverse Motor Large Remote Control 433MHZ

Brand: Einaus

Features:

• The DC12V 2CH receiver with 2 relays, the motor can be controlled forward and backward, or the power supply ON and OFF, here is specially designed for DC12V low power motor forward and rear. The switch can be compatible with 2262/2260/1527/2240 etc. Chip and multiple code transmitters.
• Keep it from dust and moisture. The product uses radio frequency technology, with a longer range and a stable signal.
• Maximum output is up to 10A. You could switch the receiver with transmitter (remote) from any location within a reliable distance. The wireless radio signals can run through walls, floors and doors. The product uses unaligned wireless coding technology and allows independent control without mutual control. The remote control has a range of up to 100m-200m.
• Note: If you receive these receivers, you can directly connect with motor, such as picture 5
• Reliable control: The transmitter (encoding) and the receiver (decoding) use an 8-bit code. One / more transmitters can control one / more receivers at the same time. If you use two or more receivers in the same place, you can set them with different codes.

Details: Delivery
1 x receiver with housing.
Remote control with battery (if you need extra remote control, please tell us).

Parameters
Operating voltage: DC12 V.
Standby current: ≤10mA
1 channel working current ≤ 40 mA.
2-channel working current ≤ 80 mA.
Output current ≤ 10A.
Control mode: we have already set latch before shipment.
Receiving board size: 70 mm x 50 mm x 18 mm.
Warranty: 1 year

The working mode can be changed to the following:
Jumper to "2 & 3 pin" → Toggle (1 button on/same button off)
Jumper on "1&2"Pin" → Latch (1 button on/one other button off)
No jumper or jumper on 1 pin→Momentary (button function, relay pulls on as long as button pressed)

embedding
Momentary.
Press the button ▲ of transmitter: motor rotates in positive direction. Release the button: motor stops.
Press the button ✤ from transmitter: motor rotates in reverse direction. Release the button: engine stops.

Toggle.
Press the button ▲ of transmitter: motor rotates in positive direction. Press again: motor stops
Press the button ✤ from transmitter: motor rotates in reverse direction. Press again: motor stops.

Latch
Press the button ▲ of transmitter: motor rotates in positive direction.
Press the button ✤ from transmitter: motor rotates in reverse direction.
Press the button ■ of transmitter: motor stops.

Learning Method
Input power for the receiver. Press the learning button, the LED indicator is off. Then press the transmitter as you hear the tone of relay act, it means to learn successfully.

delete code
Press and hold the learning button on the receiver until the LED is OFF to ON, which means that all stored codes have been successfully deleted.

Package Dimensions: 5.4 x 3.9 x 3.3 inches