EasyWood is a wood-filled PLA-based filament which is gravimetrically filled with approximately 40% grinded wood particles. EasyWood is a very easy to print wood filament as it is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free.
EasyWood looks, feels and smells like real wood and beautiful wood-nerve structures can be obtained by grinding the printed object a bit with a piece of fine grit sandpaper or by varying with the printing temperature.
Unique features
General printing guidelines *
Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.2mm | Flow rate: ± 104% |
Print temp: ± 210 - 240° C | Print speed: Low | Retraction: Yes ± 5mm |
Heat bed: ± 0 - 60° C | Fan speed: 50-100% | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.20 g/cc | 50 gr coil | 0.5 Kg spool | 2.3 Kg spool |
Ø 1.75mm | ± 17.3m | ± 173m | 797m |
Ø 2.85mm | ± 6.5m | ± 65m | 300m |
Nozzle cleaning
When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.
Product export information
HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Warranty Policy
All our products come with a 12 month standard warranty. The warranty cover does not include for damage caused by accidents, misuse, neglect and lack of maintenance, usual wear and tear, natural disaster or any other external causes.
Returns Policy
If you are unsatisfied with your purchase or you have changed your mind, you can return the products to us in its original packaging and saleable conditions within 30 days from the date of order. Please note that the product must be unused and in brand new condition, otherwise the return will not be accepted. You will be responsible for covering the return costs and the initial shipping is non-refundable. 20% re-stocking fees applies on all orders where product is not faulty and/or damaged.
Estimated Delivery Time Frame: 1-3 Business Days