H-King J3 Navy Cub (NE-1) 1400mm (PnP)
This US Navy (NE-1) version of the popular Piper J3 Cub is a must for all scale pilots. The details of the plane are extremely realistic and it comes in a great 1400mm size and like all Cubs is very easy to fly.
During World War II the US Navy acquired 230 of the NE-1 version to use as a primary trainer. It was a dual flight control version with the instructor up front and the student sitting in the rear seat. A very stable platform for training.
Putting this together is a breeze with every component attached by screws, including the wing halves and tailplane. This makes it easily broken down for transportation. All servos (9g) are preinstalled as well as the 45A ESC and powerful 3648-700KV brushless motor. The scale detail is exceptional with plastic injection molded parts used extensively including the dummy engine, wing struts and the dummy bungee under-carriage with large “Cub” wheels. Practical features include the linked steerable tailwheel, large magnetic battery hatch, construction of course from tough and easy to repair EPO foam.
The US Navy NE-1 is a genuine scale model that is easy to fly by pilots of all abilities including beginners. It is a fantastic looking model and its unique coloring makes it look impressive in both the air and on the ground.
Specs:
Wingspan (approx.): 1400mm (55”)
Length: 950 mm
Flying weight: 1800g
Wing load: 56 g/dm²
Propeller: 12x9
ESC: 45A
Motor: 3648-700KV brushless outrunner
Servos: 9g x 4
Includes:
All Hardware
Requires:
Your Own 4 Channel TX/RX
2200mAh 3s-4s Lipo Battery
Returns Policy
Customers may return items to warehouse for a full refund of the product cost if they are dissatisfied. This must be done within 30 days from the date of purchase, and the item must be in a good condition.
HobbyKing.com Service Centers don’t accept crash, damaged parts of the items due to misuse, and items that have been modified.
Photos and/ or videos are required for Initial Evaluation (submission via RMA). All types of FAULTY batteries are NOT required to be returned to warehouse. Photos and/ or videos are enough to justify the fault of the item.
For re-sending of items via RMA, the RMA form MUST be printed and attached on the parcel.
After submitting the RMA form, if we receive no response from your end within 45 days or once the parcel is required to send back but it is not returned to our warehouse within 45 days, it will subject to rejection of RMA application.
If HobbyKing cannot provide the replacement parts or item, the customer must return the product (in full) before they are elligable to receive a refund.
Copyright 2024 MyDeal.com.au - © All rights reserved