iCarsoft i907 Multi System Scanner OBD2 ODBII Diagnostic tool For Renault Dacia

i907 Multi-system Scanner can fully diagnose your vehicle.

It can read and clear all trouble codes.

Read Live Data Stream

Supports Multi languages

i907 Multi system Scanner is professionally designed diagnostic tool for technicians and end users that supports full system diagnosis. This scanner is a powerful DIY tool in which test modes include: CANBUS, ISO9141, KWP200.

• It can Read and Erase all trouble codes

• Read Data Stream Efficiently

• I/M Readiness: I/M Readiness designate emissions related systems functionality on the car and are ready for Inspection and Maintenance testing.

• Freeze Frame: When any error occur related to emission, certain car conditions are recorded by the on board computer. This information is denoted as freeze frame data. Freeze Data is a snapshot of the working conditions at the time of an emission related fault.

• O2 Sensor Test: This test depicts the recovery and viewing of most recently performed tests on cars’s on board computer

• On Board Monitoring: To read the results of on board diagnostic monitoring tests for specific components and systems this function can be efficiently utilized.

• Evap System Test: This function makes you able to start a leak test for the car’s EVAP system. Before using the system test function, please concern with car’s service repair manual to regulate the procedures essential to stop the test.

• Vehicle Information: This vehicle identification number (VIN) and the calibration verification number (CVN) are shown in this option along that all other information of the test vehicle.

• Retrieve generic codes (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and awaiting codes

• Check Engine Light (MIL) can be turned off by this option and it can also clear codes and reset monitors

• It can read live PCM DataStream

• Support CAN (Controller Area Network) and all other protocols

• Multilingual menu and DTC definitions- English, Spanish, and German, etc

• This professionally used scanner supports all the OBDII/EOBD test modes that include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.

• Display: Possess 2.8” Color screen, 320 x 240 pixels display with contrast adjustment

• Operation Temperature: 0 ℃ to 50 ℃

• Storage Temperature:  -20 ℃ to 70 ℃

• Power:  9V to 18V

• Operating current: 100mA@12V (Typical)

• Power consumption: 1.2W (Typical)

• 3-foot OBD II cable

• USB cable

• Hardcopy User’s Manual

• Nylon carry case