PondMAX PU Series PU3500 Filtration/Waterfall Pump - 20W - Max Flow: 3600L/H - 25MM Inlet & Outlet

Specifications:

The PondMAX Filtration & Waterfall Pumps have been manufactured with advanced technology to provide you with the best quality pumps for your pond or water feature. Visit our website to view our range of pond filtration, outdoor/underwater lighting, water treatments and general accessories.

• Variable Frequency Motor Technology - Extra high-speed rotations of the impellor.
• Open Vane Impellor - Handles large particles size up to 6mm soft sediment.
• Long life Impellor - Ceramic shaft is wear-resistant and self-lubricated by water.
• Energy Efficient - Exceptional low power consumption to high water flow conversion.
• Eco Friendly - Exceptional low dB noise rating with low mechanical vibration.
• Tool-less Assembly - Easy maintenance. No special tools are required.
• Soft Start - Rotor starts at low speed and increases over a short period of time. This reduces sudden recoil kickback on start up.

• Maximum Water Flow (L/H): 3600
• Maximum Head (m): 2.4
• Power Consumption* (W): 20W
• Volts (V): 240V
• IP Rating: IPX8
• Cable Lenght (m): 10
• Inlet Ø BSP Thread (inch): 1 (M)
• Outlet Ø BSP Thread (Male / Female): 1 (M)
• Ball Joint Outlet & Stepped Hosetail - 40mm/32mm/25mm: Yes
• Recommended Tubing Size (mm) Id: 25MM
• Frequency (Hz) AC: 50

*SUBJECT TO VARIATION ACCORDING TO LOAD

Limited Warranty 2+1 Year

• The additional 1 Year Extended Warranty applies when you REGISTER with Aquatec Equipment. See enclosed for details and please retain your proof of purchase and Warranty form.
• The warranty covers only appliance defects and faulty material and workmanship within a 2-year period.
• Faults arising due to accidents, misuse, not following manufacturer’s guidelines/instructions or power surges/spikes/brownouts will not be covered.
• The system has been designed with a specific length of cable and DC Power Supply. If any other electrical supply is attached or used this warranty is void.
• The impellor set is a consumable item and is therefore not covered under warranty.
• The warranty will be void if any tampering removal of warranty labels or electrical circuitry is evident.
• The warranty will be void if the power cord is cut or damaged in any way.
• The warranty will be void if any visible signs of overheating are present.
• Loss of livestock, damage to property or personal injury caused by this product will not be covered.
• Warranty claims caused by installation faults will not be covered.
• It is the customer’s responsibility to return the faulty appliance for any warranty claim, to Aquatec.
• For any warranty to be valid, original proof of purchase must be provided.
• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
• You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
• A Warranty claim must be made within 2 years of the date of purchase.
• If used in Marine or Saltwater, due to the harsh conditions, there is only a 1-year warranty.

Extended Warranty

• The Extended Warranty period is for an additional 1 Year and commences on the expiration of the Standard Warranty period.
• Application for Extended Warranty is FREE of any registration cost to the purchaser on completion of the Extended Warranty questionnaire can be found in the box with the item purchased.
• Please keep a copy of the registration form in a safe place together with your proof of purchase (sales receipt). Both documents will be required for any claim under this extended warranty.
• Where Aquatec determines goods are being used in a manner contrary to the instructions, specifications or this Warranty, Aquatec reserves the right to terminate the Extended Warranty for such goods and will provide written notice to the purchaser.