If you plunge with straight bits regularly you’ll know that performance can be improved by the addition of a third flute across the end of the bit. These bits offer that improved performance for only a small cost.
Bits 16.0mm diameter and above have a downshear angle for improved chip injection and smooth cut finish.
Straight bits are the most versatile bits and can be used for trenching, grooving, trimming and rebating either hand-held with a guide or in a router table. All Torquata straight bits are twin-fluted for a better-finished edge and long life. This new range of straight bits are replacing the existing range and are designed to be able to perform improved plunging cuts.
Product Code | Shank Size | Cutting Diameter Metric | Cutting Diameter Imp'l | Cutting Height Metric | Cutting Height Imp'l | Overall Length |
---|---|---|---|---|---|---|
SE-060-Q | 1/4in | 6.0 | 15/64in | 25.0 | N/A | 57.0 |
SE-064-Q | 1/4in | 6.4 | 1/4in | 25.4 | 1in | 57.2 |
SE-070-Q | 1/4in | 7.0 | N/A | 19.0 | 3/4in | 51.0 |
SE-080-Q | 1/4in | 8.0 | N/A | 25.0 | N/A | 57.0 |
SE-095-Q | 1/4in | 9.5 | 3/8in | 25.4 | 1in | 57.2 |
SE-100-Q | 1/4in | 10.0 | N/A | 25.0 | N/A | 57.0 |
SE-111-Q | 1/4in | 11.1 | 7/16in | 25.4 | 1in | 57.2 |
SE-170-Q | 1/4in | 17.0 | N/A | 25.0 | N/A | 57.0 |
SE-180-Q | 1/4in | 18.0 | N/A | 25.0 | N/A | 57.0 |
SE-190-Q | 1/4in | 19.0 | 3/4in | 25.4 | 1in | 57.2 |
SE-060-H | 1/2in | 6.0 | 15/64in | 25.0 | N/A | 67.0 |
SE-064-H | 1/2in | 6.4 | 1/4in | 25.4 | 1in | 67.9 |
SE-079-H | 1/2in | 7.9 | 5/16in | 25.4 | 1in | 67.9 |
SE-095-H | 1/2in | 9.5 | 3/8in | 25.4 | 1in | 67.9 |
SE-100-H | 1/2in | 10.0 | N/A | 32.0 | N/A | 73.0 |
SE-120-H | 1/2in | 12.0 | N/A | 32.0 | N/A | 73.0 |
SE-127-H | 1/2in | 12.7 | 1/2in | 31.8 | 1 1/4in | 73.5 |
SE-127-XH | 1/2in | 12.7 | 1/2in | 50.8 | 2in | 88.9 |
SE-130-XH | 1/2in | 13.0 | N/A | 50.0 | N/A | 92.7 |
SE-160-H | 1/2in | 16.0 | N/A | 32.0 | N/A | 73.0 |
SE-170-H | 1/2in | 17.0 | N/A | 32.0 | N/A | 73.0 |
SE-180-H | 1/2in | 18.0 | N/A | 32.0 | N/A | 73.0 |
SE-180-XH | 1/2in | 18.0 | N/A | 51.0 | N/A | 89.0 |
SE-190-H | 1/2in | 19.0 | 3/4in | 31.8 | 1 1/4in | 73.5 |
SE-250-H | 1/2in | 25.0 | N/A | 32.0 | N/A | 73.0 |
SE-254-H | 1/2in | 25.4 | 1in | 31.8 | 1 1/4in | 73.0 |