This gauge has been very well thought through and its multi functions will make shop marking and project layout easier and faster than ever. You can quickly scribe layout lines, measure depths and also lay down mortice and tenon locations on your material. Its well weighted and feels good in your hand as you are working.
This version comes with extra heads so to scribe parallel lines for mortices, you install the two 15.9mm diameter wheel cutters with their bevels facing away from each other.
Use the imperial or metric graduated steel rod to accurately place the cutter wheels in the exact location desired a minimum of 9.5mm/38in apart and lock them in place with the supplied set screws. Your chisel can also be used to set the width of the wheel cutters.
Their opposing bevels allow you to scribe on the waste side of your cut, insuring perfect chisel registration.
The included stop collar sits against the round marking gauge face and is the necessary diameter to ensure that the steel wheels don't lift or tilt when in use; this is very helpful when making marks with the steel rod extended further.
Marking tenons is equally simple and accurate. Just reverse the wheel cutters so that their bevels are facing each other and you'll be sure to scribe on the waste side of you cut.
Features
Overall length - 205mm
Metric graduations 0 - 150mm with 0.5mm increments
Imperial graduations 0 - 6in in 1/32in increments
Hardened steel cutting wheel with beveled edge makes clean cuts even against grain
Two reversible wheel cutters allow precise mortice and tenon layout
Included stop collar keeps rod steady when working
Your chisel can be used to set the width of the steel cutting wheels
Steel marking wheel at end of rod sits flush with brass fence for upright tool storage
Brass fence with strong lock and precise action o-ring
Can also be used as an accurate depth gauge
GTIN: 012312347087
Shipping Details
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee
Learn More