XCSOURCE 4pcs Electric Cloning Universal Gate Garage Door Opener Remote Control Fob 433mhz Replacement Key Fob HS641

Brand: XCSOURCE

Features:

• Lastest modern design and technology equals a simply smarter and unique remote.
• Button slide cover to protect buttons avoid accidental unplanned operation. Some remotes that use this frequency are listed below. This is not a complete list, it can copy the IC model of original remote control is 2262 2260 1527 2240 and compatible IC!
• Handy key chain size attaches to your car keys no more unwanted bulkiness. It can copy the IC model of original remote control is 2262 2260 1527 2240 PT2262 PT2240 PT2264 PT2260 PT2242 AX5326-4 AX5326-3 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 P527, etc.
• This is a fixed frequency remote cloner for copying common fixed and learning code.
• If your remote uses the 433mhz(433.92mhz) frequency it will work with the remote duplicator (note: HCS chip or rolling code remote control will not work).

Details: Features: It can copy the IC model of original remote control is 2262 2260 1527 2240 PT2262 PT2240 PT2264 PT2260 PT2242 AX5326-4 AX5326-3 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 P527, etc. If your remote uses the 433.92MHZ frequency it will work with the remote duplicator (note: HCS rolling code and encryption chip remotes can not work) Specifications: Operating Frequency: 433(433.92)MHz Rated Voltage: 12V Battery: 12V 23A Size: 54 x 36 x 14mm Weight: 30g Note: This remote can not copy HCS rolling code, if you fail in copying with proper operation, you might have to check whether your device has a chip like this. HCS encryption chip and other encryption chip can not be copied. How to Program: Because the fob has code when it was produced, so you need to reset it before copying. Reset: Hold buttons A and B down simultaneously, once the LED is flashing continuously, release both buttons to complete the reset.(If your remote hasn't have button A or B, just press the top two buttons) Copy: Hold down the button on the original remote you want to copy while simultaneously pressing and holding which button you want to program on the new fob (A, B, C, D etc.).（Both your original remote and new remote’s head should close to each other） The process will be complete with the fob LED flashes. Tips: If you reset the code that you had copied and want to recover, press buttons C and D (or the bottom two buttons) until LED light flashing. Notice: If done correctly, can use directly. If not, or individual button not useful, please turn to clean and copy again, notice the change of light during operation. If problems still exist after attempting several times, check the chip and frequency of original remote control again, and contact us. Package Includes: 4 x Remote Control Key Fob

Package Dimensions: 5.0 x 5.0 x 0.7 inches