Bluetooth controller operating instructions
1. Settings of the host
# 1 To connect the Bluetooth controller, the Controller Connection (Bluetooth) option of the host is On, or turn off Flight Mode;
# 2 On the main page, select Controllers-> Change Grip / Order to make the host search for Bluetooth devices. (This operation is not required to connect back)
# 3 Note: If the host is difficult to pair the controller, there may be too many Bluetooth devices connected to the host, you need to manually clear the Bluetooth information (System Setting-> Controllers and Sensors-> DisConnect Controllers);
?
2. Pair the controller with the controller
When the controller is off, press and hold Y (the button near Start) + Home to turn on, the 4 LEDs are in the status of running lights, and the channel indicator corresponding to the successful connection is always on. If the synchronization is not successful within 2.5 minutes, it will automatically sleep.
If the Bluetooth connection is successful, the corresponding channel indicator LED is always on (Switch host assignment)
?
3. Connect the controller to the host
When the controller is off, press the HOME button to wake up the controller for 1 second. After being awakened, it will automatically connect to the paired host and return to sleep. If the connection fails after 10 seconds, it will automatically sleep;
No wake-up function for other buttons
?
4. Handle shutdown and sleep
Long press the Home button for 5s to close the handle;
After the handle is successfully connected, if it is not operated for 5 minutes, it will automatically enter the sleep state;
The screen of the host is turned off, the handle automatically sleeps
?
5. Low voltage alarm
If the lithium battery voltage is lower than 3.55V ¡À 0.1V, the current channel light flashes quickly to indicate that the voltage is low;
If the lithium battery voltage is lower than 3.45V ¡À 0.1V, it will automatically sleep;