GS5208PLG EDIMAX 8 Port Giga PoE Smart Switch 160W Ieee 802.3Af/at PoE Compliant Ieee 802.3Af/at

GS5208PLG EDIMAX 8 Port Giga PoE Smart Switch 160W Ieee 802.3Af/at PoE Compliant Ieee 802.3Af/at

 
Features
8-Port Gigabit PoE+ with 2 SFP Slots Web Smart Switch
  • IEEE 802.3af/at PoE compliant.
  • Eight Gigabit Ethernet ports.
  • Up to 30W per port (total power budget: 160W) for powering PoE-enabled devices.
  • Auto-detection of powered devices (PD) and power consumption levels.
  • Auto fault-detection on over/under current & voltage.
  • Access Control List (ACL) support.
  • Switch capacity:20Gbps & Forwarding rate:14.88Mpps.
  • IEEE 802.1Q-based VLAN for network segmentation to improve performance and security.
  • IEEE 802.1p QoS with 4 priority queues
  • IGMP Snooping V1 / V2 / V3 support.
  • 4K MAC address table and jumbo frame support up to 9KB.
  • 19-inch 1U rack-mount brackets included.
The Edimax Pro GS-5208PLG is a web-smart switch with 8 Gigabit PoE+ and 2 Gigabit SFP slots. Designed for medium to small network environments, its standard 19-inch 1U rack-mount brackets allow for integration with the most widely used mounting systems on the market. The Edimax GS-5208PLG is a superb choice to boost your network environment's performance and efficiency.

IEEE 802.3at/af Power over Ethernet Standard
The GS-5208PLG features 8 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port, and has a total power supply of 160 W to power any802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5208PLG is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable.The GS-5208PLG can be used with different PoE products such as access points, network cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access.

PoE for Easy Installation and Better Cost Efficiency
Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation and eliminating the need for extension cords orelectrical outlets on the walls and ceiling. Overall the GS-5208PLG can lower installation costs and simplify the deployment effort.

Power-Budget User Interface for PoE Device Management
The GS-5208PLG features an innovative power-budget UI (user interface) which allows IT managers to monitor the power consumption of each PoE port and the total power consumption of connected PoE devices. Monitor the entire PoEnetwork and assess the total power usage before adding new PoE devices to the network architecture. The power-budget UIalso features a remote on/off function for each PoE port, somanual plug/unplug isn't necessary when a PoE device hangs. Simply use the remote power button to quickly reset the device.

Smart Tools for Improved Network Efficiency
The GS-5208PLG features smart network monitoring tools that allow for improved network efficiency. Security and management features include bandwidth control and VLAN (IEEE 802.1Q VLAN). Using its web-based interface, administrators can set up VLANs to segregate traffic and configure link aggregation settings to create fat traffic pipelines. Additionally, these features offer extra protection on the network edge and the password-protected configuration interface can be accessed remotely.






APPLICATION DIAGRAM


?
*Maximum performance, actual data rates, and coveragewill vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to changewithout notice.
Sepcifications
HARDWARE
Ports 8 Port RJ-45 10/100/1000Base-T PoE+ Ports
2 Port 1000Base-X SFP slots
Transmission Method Store and forward
Buttons Reset button
LED Indicators Per Port: Link/Act
PoE: Act/Status
Per Unit: Power
Power Input 100-240V AC, 50-60 Hz,internal power supply
Total Power Budget 160W
Dimensions (L x W x H) 265 × 184 × 44 mm
Weight 1.7kg
PERFORMANCE
Switching Capacity 20Gbps
Forwarding Rate 14.88Mpps
MAC Address 4K
Buffer Memory 192KB
Jumbo Frames 9.2KB
Filtering/Forwarding Rates 1000Mbps port - 1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
POWER OVER ETHERNET
Standard IEEE 802.3af, IEEE 802.3at
Power Output Up to 30W per port
Pin Assignment 1/2(+), 3/6(-) End-Span (mode A)
Available Power Budget 130W
Management PoE ouput on/off management
SMART FEATURES
VLAN Up to 8 VLANs and 4096VLAN IDs
802.1Q tag-based VLAN
Port Trunking IEEE 802.3ad LACP Trunk-Static trunk up to 1 trunk groups
IGMP Snooping IGMP v1/v2/v3 snooping
Block unknown multicast traffic
Multicast groups: 128
QoS Port-based QoS, IEEE802.1p QoS, 4 Priority Queues, scheduling algorithm
Management User Interface: Web-based management
User Account: Login account configuration
Firmware Upgrade: Firmware upgrade by WEB
Loop Detection/Prevention
Security Broadcast Storm control
ENVIRONMENT
Temperature Operating: 0 ~ 40°C
Storage: -40 ~ 70°C
Humidity (Non-condensing) Operating: 10 ~ 90%
Storage: 5 ~ 90%
STANDARDS COMPLIANCE
Standards

IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet
IEEE 802.3x Full-duplex and Flow Control
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1Q VLAN
IEEE 802.1p Quality of Service (QoS)
IEEE 802.3af Power Over Ethernet (PoE)
IEEE 802.3at Power Over Ethernet Plus (PoE+)

Certifications FCC Class A, CE

Weight: 2.5120

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.
GTIN: 4717964702708

Shipping Details

  • Estimated Delivery Time:
    • Metro Areas: 1-2 business days
    • Rural and Remote Areas: 2-8 business days
  • Delivery Note:
    • No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
    • Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
    • Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

  • The item is in a brand new, sealed and resaleable condition
  • We are contacted within 30 days of the item being received
  • The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.

Refund Guarantee Icon
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee Learn More
Sold & shipped by Radio Parts
cashback icon
gold Seller
A seller's rating is an overall score calculated from performance metrics. Learn More
93.46%

More from this brand

Reference ID: 745117

Reviews (0) Add Review

No reviews yet