Infrared (IR) Thermometer

Specifications:

• Infrared (IR) Thermometer (DT 8380)
• Features:
  
  • Hand-held, non contact thermometer that uses Infrared Beam to measure temperature
  • Safe, accurate, quick , reliable
  • Can be used for measuring both low , high temperatures from a distance
  • High accuracy and wide range of temperature measurement (-50,deg;C / +380,deg;C)
  • Measure the temperature of foods, liquids and virtually any object or item remotely
  • Suitable for homes, schools , industry
  • ,deg;C/F settting, LCD with backlight
  • Automatic power off after 10 secs
• Note: Due to aviation shipping restrictions, batteries are not included with this item
• Product Specifications:
  
  • Temperature range: -50,deg;C to 380,deg;C
  • Accuracy: -+2,deg;Cor -+2%
  • ,deg;C/F setting
  • MAX/MIN value, data hold
  • Resolution: 0.1,deg;C or 0.1F
  • Operating temperature: 10-40,deg;C, humidity:10-90RH
  • Storage temperature: -10,deg;C-40,deg;C
  • Response time: ,lt;=0.8second
  • Distance to Spot Ratio: 12:1
  • Emissivity setting: 0.1-0.99 (default value:0.95, testing different material easy and accuracy)
  • Power: AAA, 1.5V battery each (batteries not included)
  • Battery life:12 hours
  • Back lighting
  • Automatic power off in 10 seconds
• Distance : Spot (D:S) ratio = 12 : 1
  
  • The further the object, the testing spot is bigger. D: S means distance and testing spot. When the distance is 48cm, the diameter of testing spot is 4cm, the units will show the diameter of 4cm regional average temperature.
• How to Use:
  • Power on: Press measure key (7) to turn the unit ON
  • Measurement: Point thermometer towards the object and press measure key (7) for single measurement or hold on measure key for constant measurement. (The interval is not less than one second)
  • Automatic power off in 10 secs on non-usage
  • Emissivity Settings: Emissivity for most organic material and painted or oxidized surface is 0.95, but for some metal surface like Copper/Aluminium it is lower than 0.95). In such instances, the testing value could be inaccurate and hereby the settings must be correctly set.
  • Emissivity Setting Procedure:
    • Press laser light key(2) first, then hold measure key (7) at the same time for 3 seconds.The emissivity symbol E for tens place will flash
    • You can press laser light key (2) or back light key (3) to increase or decrease 0.1 by tens place
    • Press MODE key access for digit place settings
    • Press laser light key (2)or back light key (3) to increase or decrease 0.1 by digit place
    • Press MODE key to complete emissivity setting
  • Replace battery: When LCD show low battery symbol (15), please replace the battery
• Caution: DO NOT point the IR beam towards the eyes directly as it may cause permanent damage to the eyes. It is illegal to point the laser beam towards planes , other moving vehicles in Australia and criminal charges may incur for such activities