QIACHIP Universal Wireless Relay Module 12V 1CH Remote Control Light Switch Receiver RF 433 Mhz with 2 Smart Transmitters for Entrance Control, Car Light 164ft Long Range

Brand: QIACHIP

Features:

• 【Long Range】Small and the performance is stable and reliable, high sensitivity, signal can pass through walls, floors and doors. Range up to 50m/164ft in open space.❤Note:①When the remote control distance can’t meet the requirements, pls replace the battery;②The remote control distance will be affected by the use environment. Do not place the receiver or remote control in a metal case or near a metal object; ③You can try to straighten the receiver antenna to increase the remote control distance.
• 【Wide Application】Application for industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
• 【Flexible Control】Reliable control,the receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously, allowing independent control without mutual interference. Warm Tip :Support remote type: EV1527 learning code.
• 【Easy to Install & Stable】Wireless control, easy to setup and use, Stable and reliable performance, high receive sensitivity, high confidentiality.
• 【Package Includes】Comes with 2 Pcs 2 button Transmitters and 1 Pcs 1CH receiver. Mounting holes are provided for easy installation to walls. NOTE: Please email us if you meet any problem, we are always here to help, thanks!

Binding: Electronics

Details: Product Name: 2 Button Wireless Remote Switch Transmitter + 1CH Receiver Set Modulation Mode: ASK Operating RF Frequency: 433MHz Input Voltage: 12 V, RF working mode: Superheterodyne Receiver sensitivity: > 97 dbm Decoding mode: MCU software decoding Remote storage: 15 Support remote type: EV1527 learning code Working mode: Momentary, toggle, latching, time delay (5s ,10s ,15s ) Output terminal: NO , NC , COM Dimension of PCB: 35 x 30 x 18 mm (L,W,H) Power by 3V Coin Cell Button Battery (Battery included ) Note: 1. Maximum input power is 250 V 2. Instructions for use attached to the picture Working mode： 1. Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects. 2. Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . 3. Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. 4. Time delay mode: Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.

Package Dimensions: 6.4 x 5.3 x 1.0 inches