XDAAMP5400RK YAMAHA 4 Zone 8Ch Multiroom Amplifier Yamaha XDA-AMP5400RK Expansion Option For Yamaha
Specially designed for custom integrationof whole home audio systems, the "AMP" serves asa companion amplifier for the Yamaha XDA-QS5400RK to expand speaker coverage and/or increase power output.
It may also be used to expand secondary zone speaker coverage for Yamaha AV receivers that have Zonepre outs.
The XDA-AMP5400RK -the "AMP" - was conceived as a companion to the Yamaha XDA-QS5400RK as a way to provide additional speaker coverage and/or additional speaker output power in acustom integrated multi-room home audio system.
It also pairs nicely withYamaha AV receivers that offer Zone pre outs.
The AMP packs eight channels of audiophile-grade amplification into a remarkably-slim 1U-high enclosure, allowing you to fully optimise your valuable rack real estate.
Feed up to four sources from QS pre outs into the AMP - its four audio I/O buses can be patchedtogether to handle a wide array of speaker/zone configurations.
The AMP comes with a set of jumper plugs and cables, making it ultra-versatile right out of the box.
The audio outs can alternatively be used to connect powered subwoofers or subwoofer amps.
Each of the four amplifier zones is also bridgeable, giving you the option to increase power output to select speakers if needed.
The amp employs ultra-efficient ICEpower integrated circuits to deliver eight channels of pristine, musically-dynamic digital amplification at 50 watts/channel (8 ohms) with an outstanding 5 Hz to 40 kHz (+0/-3 dB) frequency response and108 dB signal-to-noise ratio.
It is 4 ohm capable at 100 watts/channel and bridgeable to 200 watts/channel (8 ohms).
The curse of the custom integrator: ground loop hum, a common and vexing side effectof connecting a bunch of electronics together in a rack.
The QS takes care of it with a brilliantly-engineered differential circuit design. Sometimes it's what you don't hear that sounds the most amazing.
The AMP employs a balanced audio circuit design and PML capacitors, which are also used in our flagship AVENTAGE AV separates.
The result: greater realism and expressiveness for all of your favourite music.
Mount it in a rack with the included ears or remove the ears for shelf installations. The included magnetic faceplate discourages tampering and provides the perfect cosmetic finish.
When a QS and AMP are used together, simply wire the trigger ports to automatically power on/off the desired amplifier zones - no additional control interface is needed.
The AMP also works great as a companion to an AVENTAGE AV receiver.
When using the AMP with other sources, audio sensing inputs and an infrared I/O provide additional control flexibility.
The AMP is truly made forcustom integration, with Euroblock-style speaker connectors and a detachable AC cable for smart connectivity.
| XDA-AMP5400RK |
|---|
| XDA-AMP5400RK | ||
|---|---|---|
| Multi-Room Amplifier | ||
| Audio Specifications | Channel | 8 channel (2 channel x 4) |
| Minimum Speaker load Capability | 4 ohm | |
| BTL Connection | Yes | |
| Speaker Output Terminal | 4 (Euroblock) | |
| Audio Input Terminal | RCA: 4 | |
| Audio Output Terminal | RCA (2-ch through out): 4 | |
| Trigger In / Out | 4 / 4 | |
| Remote In / Out | 1 / 1 | |
| Rated Output Power (1 kHz, 0.9% THD, 2ch driven) | Normal (4 / 8 ohms): 90 / 50W, Bridge (8 ohms): 100 W | |
| Rated Output Power (1 kHz, 0.9% THD, 1ch driven) | Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W | |
| Dynamic Power (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst) | Normal (4 / 8 ohms): 80 / 40W, Bridge (8 ohms): 150 W | |
| Dynamic Power (1kHz, 0.9% THD, 2ch driven, 20 ms burst) | Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W | |
| Dynamic Power (1kHz, 0.9% THD, All ch driven, 20 ms burst) | Normal (4 / 8 ohms): 80 / 50W, Bridge (8 ohms):170 W | |
| Maximum Effective Output Power | [1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W | |
| Total Harmonic Distortion | [SP OUT, 20 Hz-20 kHz, 25 W,8 ohm] 0.04% | |
| Frequency Response | [1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz | |
| Signal to Noise Ratio | [SP OUT AUX IN] 108 dB | |
| Maximum Input Signal | [PRE OUT L / R, 0.9% THD] 1 V | |
| Gain | [SP OUT 1 V Input] 25.8 dB | |
| Input Sensitivity | [1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V | |
| General | Power Consumption | 130 W, [All Zone On] No Signal Condition: 32 W, [All Zone Off] Audio Sense On: 14.8 W |
| Standby Power Consumption | Audio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W | |
| Power Management(Auto Power Standby) | Yes (On / Off) | |
| Dimension (W × H × D) mm | [Table Top Mount with Adhesive Feet] 437 x 46 x 443 mm; 17-1/4" x 1-3/4" x 17-3/8", [Table Top Mount with AdhesiveFeet and Faceplate] 437 x 46 x 453 mm; 17-1/4" x 1-3/4" x 17-7/8", [Rack Mount] 481 x 44 x 443 mm; 18-7/8" x 1-3/4" x 17-3/8", [Rack Mount with Faceplate] 481 x 44 x 453 mm; 18-7/8" x 1-3/4" x 17-7/8" | |
| Weight | 6.0 kg; 13.2 lbs. |
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Copyright 2024 MyDeal.com.au - © All rights reserved