NETCOMM 4G LTE Cat 1 Industrial IoT Failover Router Modems/Routers - NTC-221-01-01

NETCOMM 4G LTE Cat 1 Industrial IoT Failover Router Modems/Routers - NTC-221-01-01

Hurry! 6 items left!
Price
$564.68
Earn 3x points and collect 1692 Everyday Rewards points. Promotion ends 16/05/2024.
Create a MyDeal Account or Login to link your card
Shipping
Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
 
24-48 hour dispatch
Quantity
Maximum item limit (6) has been reached.
 
Netcomm NTC-221-01-01 4G LTE Cat 1 Industrial IoT Failover Router
The 4G LTE Category 1 Industrial IoT Router (NTC-220) is a robust, cost-effective device, designed to bring value to a myriad of applications. Supporting Category 1, the NTC-220 is ideal for the use-case scenarios requiring extended data throughput, yet reliable and highly secure connectivity. Its enhanced remote management and software development capabilities enable to tailor the device to the most unique needs.

What’s in it for you?

  • Cat 1 4G LTE (10Mbps)

  • A Fast Ethernet port, a serial port and a USB port

  • Integrated GPS for reliable asset tracking

  • Software configurable I/O ports

  • Rugged industrial design for harsh environments

  • Ignition sense capability and a wide input voltage range for vehicular applications

Specifications:

 
PEAK DATA SPEED (MODEL DEPENDENT)
  • LTE FDD: Max 10 Mbps (DL) / Max 5 Mbps (UL)
  • LTE TDD: Max 8.96 Mbps (DL) / Max 3.1 Mbps (UL)
  • DC-HSPA+: Max 42 Mbps (DL) / Max 5.76 Mbps (UL)
  • UMTS: Max 384Kbps (DL) / Max 384Kbps (UL)
  • EDGE: Max 236.8 Kbps (DL) / Max 236.8 Kbps (UL)
  • GPRS: Max 85.6 Kbps (DL) / Max 85.6 Kbps (UL
ANTENNA CONNECTORS
  • 2 x SMA connectors for 4G/3G/2G (1 x Main and 1 x RX Diversity)
  • 1 x SMA connector for GPS
INTERFACES
  • 1 x 100Base-T Ethernet RJ45 port
  • 1 x RS232 Serial Port DB-9 female DCE supporting either 9 wire RS232 or RS485/RS422 (software selectable)
  • Software controlled termination resistors for RS485
  • 1 x Micro USB 2.0 OTG interface with 0.5A supply capability
  • I/O terminal block providing:
  • – 3 x Multipurpose I/O pins
  • – NAMUR (EN 60947-5-6 / IEC 60947-5-6) compatible sensor input
  • – Analogue 0V to 30V input
  • – Digital input (through measurement of voltage above/ below threshold)
  • – Open collector output
  • 1 x Recessed multifunctional reset button
  • – Reboot
  • – Reboot into recovery mode
  • – Reset to factory default settings
LED INDICATORS
  • 8 x tri-colour LEDs
  • – Power, Network, a GPS/customizable LED and 5x
  • Signal Strength indicators
  • Easy and clear LED status display for connection status, connected network type, and connection errorsGP
GPS
  • GPS
  • GLONASS
  • BeiDou
  • Galileo
  • QZSS
SIM CARD READER
  • 1 x SIM card slot
  • – Supports Mini USIM/SIM Format (2FF)
  • – Optional soldered-down SIM (ETSI MFF2 DFN-8 USIM)
PROCESSOR AND STORAGE
  • – 800 MHz ARM Cortex A8 processor with 128 MB RAM
  • – 512 MB flash memory storage
  • Advanced Diagnostics and Control via SMS
  • – Query status information – such as Signal Strength, WAN IP, Uptime, and many more
  • – Configure device remotely via SMS – such as APN, authentication settings, and many more
  • Execute commands via SMS – such as reboot, reset to defaults, go offline, and many more
  • Secure SMS management using sender whitelisting and password management
FIRMWARE MANAGEMENT
  • Firmware Upgrade locally via LAN or remotely Over-TheAir (HTTPS, SNMP, TR-069, LWM2M)
  • Multiple firmware image storage on device and dynamic install
  • Triggered firmware upgrade via SMS (initiate download & install from HTTPS)
SOFTWARE DEVELOPMENT KIT
  • Develop and install custom software applications
  • Open Linux standard development environment
  • Develop applications/scripting in standard ANSI C/Shell script and LUA
  • Package manager built into Web-UI for Application installation/removal
CELLULAR
  • Profile managed packet data connections
  • NAT Disable for framed route configuration
  • Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device
  • SIM Security Management (PIN configuration, enable and disable)
  • Automatic and manual cellular band selection
  • Automatic and manual operator selection
  • Odometer reading available via Web-UI, CLI and SDK
NETWORK & ROUTING
  • Static Routing, RIP (v1/v2), Port Forwarding and DMZ
  • Dynamic DNS
  • VRRP for redundant router failover
  • – DHCP Server including address reservation by MAC address
  • – Custom DNS server definitions
  • – DHCP Relay
  • – DHCP list display in Web-UI
  • – Advanced DHCP Option configuration (Option 42 NTP, Option 66 TFTP, Option 150, Option 160)
  • Data Stream Manager providing ability to create mappings between input and output ports (e.g. Serial
  • Port, SMS, USB) and perform required translation or data processing by each virtual tunnel.
  • Modbus Server TCP/IP Gateway and Client TCP/IP Agent with up to 247 slaves connected to the Serial TCP/IP Gateway.
  • Modbus RTU/ASCII frames support
VPN
  • PPTP Client for VPN connectivity to remote PPTP VPN Server
  • IPSec tunnel termination (for up to 5 tunnels)
  • GRE Tunnelling
  • OpenVPN (Client, Server and P2P)
ADMINISTRATION & CONFIGURATION
  • Secure web-based user interface (HTTPS) for full device status and configuration
  • Password protected configuration file backup and restore for quick device configuration and device cloning
  • SSH Command Line Interface for status monitoring, configuration and control
  • SNMP v1/v2/v3 including cellular specific MIB, config and firmware download
  • TR-069 Client for remote device configuration, configuration backup and restore, and firmware upgrade
  • SMS Client (Send/Receive) including inbox, outbox
  • Ping monitor watchdog (Reset connection on repeated ping failure)
  • Diagnostic Log Viewer (remote and local)
  • System Status and Security Logs
  • NTP Server Support for network time sync of device’s system clock
  • Device User Guide stored on the device and accessible via the secure web-based user interface (HTTPS)
  • API (C, LUA and Shell libraries) to the unit’s internal Runtime Database to allow full status monitoring configuration and control of the device from custom applications
TEMPERATURE
  • Operating Temperature Range: -40°C to +70°C
  • Storage Temperature Range: -40°C to +85°C
  • Operating Humidity Range: 0-95%
POWER SUPPLY
  • Power input via 6-way termination block receptacle
  • Field terminable power input via screw type terminal block included
  • DC Power (8 - 40V DC)
  • 1 x Dedicated ignition input and 3 x I/O ports on 6-way connector (only available on some models)
  • Power consumption 6W, recommended DC supply via terminal block (12V 1.5A)
  • Vehicle compatible protection on DC Input Jack. (ISO7637 standard)
DIMENSIONS, WEIGHT & MOUNTING
  • Device dimensions (excluding external antenna): 143 mm
  • (L) x 107 mm (W) x 34 mm (D) / 221 g (254 g with bracket)
  • Wall mount support in multiple orientations via embedded mounting holes
  • DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)
GTIN: 9317773019162

Shipping Details

Delivery varies by location, please see the expected timeframe to receive your product below:

Metro: 1-4 business days

Regional: 1-6 business days No delivery to PO Box addresses or Parcel Lockers.

If you are unavailable at the time of delivery re-delivery fees may apply.

Customer may return Products purchased from MyITHub and receive a credit of the paid price, subject to the following: (a) the Product for return is logged on MyITHub website or via Email; (b) the Product is returned to MyITHub within fourteen (14) days of the invoice date; (c) the list price of the Product has not decreased from the price paid; (d) the Product is new and Unused; (e) the Product is in its original package, which has not been damaged or altered; (f) Products sold on a “no returns basis” are excluded. MyITHub reserves the right to apply the No Returns Basis policy to any promotional or sales product (s) as it deems necessary. and (g) MyITHub determines, in it sole judgment, that Customer is in good standing. Products satisfying all the foregoing requirements may also be returned subject to a 20% restocking fee.

Products purchased from MyITHub that are determined to be defective within fourteen (14) days of the invoice date, may be returned to MyITHub for assistance in processing a manufacturers warranty, provided that the product is covered by a manufacturer’s warranty and the Customer is determined, in MyITHub sole judgment, to be in good standing.

Refund Guarantee Icon
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee Learn More

Estimated Delivery Time Frame: 1-6

Have a question about this product? Click here
Secure ways to pay at checkout
Buy Now, Pay Later
From $10/week with
Zip
4 interest-free instalments of $141.17 (excluding shipping) by AfterPay
Pay in 4 interest-free payments of $141.17 with PayPal
Sold & shipped by Myithub Australia
cashback icon
gold Seller
A seller's rating is an overall score calculated from performance metrics. Learn More
95.22%
Proudly growing a MyDeal Forest
Proudly growing a MyDeal Forest
By purchasing from MyDeal, you’re helping us plant 7.8 hectares of trees per year with Greenfleet. Learn More

More from this brand

Reference ID: 10695456

Reviews (0) Add Review

No reviews yet